The titanium rod filter element has a very wide chemical compatibility, can be used for most liquid filtration, and has a good performance in dust filtration. Because of its high porosity and good strength, it is particularly excellent infiltration of rigid particles, so it is widely used in the decarbonization filtration of liquids. At the same time, because of the chemical properties of titanium, it is used in strong oxidizing liquids, various complex chemical liquids, steam, and other filtration systems. , very suitable for selection.
▶ Uniform structure, narrow pore size distribution, and high separation efficiency.
▶ High porosity, low filtration resistance, and high penetration efficiency.
▶ High-temperature resistance generally can be used normally in the wet state below 280 degrees.
▶ Good chemical stability, acid, and alkali corrosion resistance, and oxidation resistance.
▶ It is non-magnetic and non-toxic and has good compatibility with human tissue and blood, so it is widely used in the pharmaceutical industry, food industry, and water treatment industry.
▶ No particles fall off, do not cause secondary pollution of the original solution, and meet the requirements of food hygiene and pharmaceutical GMP.
▶ It has a strong anti-microbial ability and does not interact with microorganisms.
▶ It can be regenerated online, is easy to clean, and has a long service life (usually several times that of the membrane filter element).
The stainless steel powder sintered filter element is made of 304 or 316 stainless steel powder. Process is that stainless steel powder is hydrostatic molded, and then sintered in high temperature vacuum. They can provide micron-level precision filtration, separate liquid, solid particles in the gas impurities. The filter elements can be cleaned by backwashing or back flushing, so that the filter element can be reused. They are high strength, chemical resistance, high temperature resistance and the applications are broad.
Features and Benefits
1: High permeability, low pressure drop.
2: Shape stability, components with high strength;
3: High temperature (up to 600℃ in work environment);
4: Corrosion resistance;
5: Impact resistance, alternating load high;
6: Good air permeability, good separation effect;
7: Easy to clean, available saturated steam, chemical solvents, thermal processes and ultrasonic cleaning.
Stainless steel sintered metal mesh filter are 5 - 7 layers woven or perforated stainless steel wire mesh overlapped together, and then sintered in the vacuum sintering furnace. The filters has excellent properties of resistance corrosion and resistance high-temperature. It is a common used for liquid and gas filtration in petroleum, polyester, pharmacy, chemical fiber, food and beverage, and water treatment industries
Tanvi pleated stainless steel wire mesh filter cartridges made entirely of 304 or 316 stainless steel. Element surfaces are pleated to increase surface area. Support layer of coarser mesh to prevent pleated collapse. They are fabricated by welding and crimping. They are good temperature tolerance up to 500℃ and unaffected by most caustic fluids. Besides, they are cleanable and reusable and can withstand differential pressures up to 30Mpa.